Monday, March 30, 2015

Intel and Micron want to increase capacity of laptop memory

Boise / Santa Clara (AP) - More than 10 terabytes of data should be able to take a conventional memory card for laptops with new memory cells that Intel developed jointly with the US company Micron Technology.

External memory cards for about PCs today have a capacity of around 1 to 3 terabytes. For the increased capacity, the companies have arranged the memory cells in three-dimensional architecture. In the conventional production of flash memory, the physical limits are nearly exhausted, Intel said on Thursday (local time).

The new technology should a "dramatic effect" on it have to be able to produce memory cards with higher performance at a lower cost in the future, says Intel. And on kleistem room. A chewing gum sticks large memory stick should therefore can hold around 3.5 terabytes of data. Samsung had launched its first 3D memory on the market last year. Intel and Micron process should bring three times the power, according to the company.

The individual memory cells of flash memories about laptops are usually positioned next to each other. By now, the researchers arrange the cells above the other in 32 layers, the cells could be significantly larger, such as Intel announced. Thus, should both performance and endurance of the memory can be increased. The new memory are also suitable for use in data centers. The production of memory have already begun in the fourth quarter, it should be ready for production.

Thursday, March 26, 2015

Accurately measured with the Josephson quantum voltmeter voltages

The so-called Josephson effect, working voltages very precisely. In the future, help reduce uncertainties, a quantum voltmeter.

For over four years developed esz calibration and metrology together with Supracon from Jena and the PTB - Physikalisch-Technische Bundesanstalt, Braunschweig, the world's first industrial use AC / DC Josephson quantum voltmeter. Under the Josephson effect is understood a physical effect, which describes the tunnel current between two superconductors. Josephson junctions are very accurate frequency-to-voltage converter.

In the metrology of the inverse Josephson effect is used in order to accurately represent voltages. So far, only Josephson standards are used for DC representation. With the AC / DC Josephson quantum voltmeter can measure in addition to 2 kHz alternating voltages up to 7.19 V at a frequency of 10 Hz. By AC / DC Josephson quantum voltmeter should be possible to reduce by up to a factor of 1000 and AC voltages by a factor of 50 in future uncertainty in measurement of DC voltage.

"The next challenge is how we get away from liquid helium as the operating medium," says Alexander Winter Meier, applications engineer at esz. "Liquid helium is very expensive and difficult to obtain. We want to work with a small cooler which allows an operating temperature of 4 K (-269 ° C) on the chip. "This temperature is necessary to maintain the Josephson elements in the superconducting state. By realizing the next development stage esz will be able to operate the AC / DC Josephson normal cost effective and durable.

The Josephson system is currently for four weeks in the laboratory esz to make a series of functional tests and measurements in the industrial environment. After the system goes back to the further development Quantenkalibrator for current, voltage and resistance to Supracon to Jena. The Josephson Quantenkalibrator should be fully developed end of 2016. The total investment of esz for the project is 340,000 euros.

Wednesday, March 25, 2015

How secure is the Internet of Things with Wi-Fi?

Since the IoT for connected life and work is becoming increasingly important, companies must find answers to questions of network security. Private Pre-Shared Keys (PPSK) can help here.

In the private or professional environment we share a wireless network with others, and use for registration, and authentication is usually only a single pre-distributed network key, Pre-Shared Key (PSK) called. In an IoT scenario however, it is better to be able to control where and how this key is passed on to the connected devices. The only way to prevent the unprotected network key an air conditioner or smart lighting system for loophole for attacker.

The question is: How safe are the devices that connect to the network? In the IoT sector are usually relatively simple products that barely have mechanisms to effectively protect yourself and your wireless network. Therefore, they can often be easily chop. This in turn means that access to the network and possibly even sensitive corporate data are extremely vulnerable.

The degree of vulnerability were experts of the security company "Context Information Security" in 2014 by the example of a smart lighting system. By giving yourself access to the central air unit, they initially controlled the lighting system, then changes to the WLAN configuration could make and were in control of the entire building management.

The problem with this kind of lighting systems and IoT devices is generally that they use in most cases only a single pre-distributed keys (PSK) to connect to the network. One reason is that many of these devices only support WPA / WPA2 and not RADIUS.

As the study of context has been distributed keys are never advance a more secure way to authenticate devices. Even the detour via the connection of a separate SSID specifically for this requirement is not recommended because each additional broadcast SSID reduces the overall performance of the WLAN network - a phenomenon that is known as the SSID overhead. So what should companies do to safely and efficiently integrate the variety of devices?

Friday, March 13, 2015

2015 tablet shipments rose only 2.1 percent, Microsoft will be the winner

March 13, according to foreign media reports, market research firm IDC on Thursday announced the 2015 Tablet PC shipments expected data. The report shows that in 2015 global tablet PC shipments grew only 2.1% compared with 2014, to 234.5 million units, the smallest increase since the formation of the primary market.
   
In addition, although Android Tablet PC is still the market leader, but IDC expects its market share will decline in the future. According to IDC expects, Android Tablet PC shipments in 2015 will be from last year's 154.7 million units to 158.1 million units, the market share grew from 67.30% to 67.40%; but out to 2019, Android Tablet PC shipments only will grow to 169.5 million units, while the market share will decline to 62.90%.

In fact the performance of Apple's iOS devices are not better than Android. IDC expects, iPad shipments this year, only 60.1 million units, down from 63.4 million units level in 2014, and the market share will decline from 27.60% to 25.60%. 2019 Apple iPad shipments will see a slight increase, but the market share will decline to 23.00%.
   
The next biggest winner tablet market will be a Windows device. IDC expects Windows Tablet PC shipments in 2015 up to 16.3 million units, significantly higher than the 2014 level of 11.6 million units, while the market share will increase to 7.00%. By the 2019, two data will achieve double which shipments will reach 38 million units, the market share will reach 14.10%.
   
"Microsoft is now doing a lot of good efforts, so we believe that the launch of Windows 10 later this year will not only play a catalytic role in Microsoft's market share, but also have a positive impact on the entire industry." IDC research director Jane · Philip Bouchard (Jean Philippe Bouchard), said.
   
Tablet PC growth is now slowing down, or even an important reason for the decline in the volume of the "flat mobile phone" epidemic. With the smart phone screen size is growing, these devices began to erode the traditional market tablet.

Wednesday, March 11, 2015

Bayer polycarbonate composite materials experts TCG acquisition

Bayer MaterialScience (Bayer) in South Devon completed a business acquisition, thereby expanding its position in the composites market, the market is one of the future direction of Bayer MaterialScience. Bayer MaterialScience was completed in March 2, 2015 in Nuremberg, near Langenfeld a full takeover of thermoplastic Plastic Composites Co., Ltd. (TCG), the company is a technology pioneer in the production of thermoplastic fiber composites field. Bayer MaterialScience will use the acquisition to expand its product range in key industries, thereby enhancing its leadership.

Bayer MaterialScience plans to fiber reinforced thermoplastic plastic (composite) made of composite materials on the market. This is a new ultra-thin lightweight materials, with aluminum alloy material than existing solutions such as more superior performance. TCG acquisition makes Bayer MaterialScience access to innovative patented proprietary technology and equipment as well as an important resource. All employees of the company will be retained. Bayer MaterialScience plans to expand production capacity TCG, the first step is to expand the production capacity of the Nuremberg area. Subsequently, production in other regions could also be a corresponding increase in accordance with customer demand, to optimize customer supply.

Bayer MaterialScience has been actively involved in the development and promotion of polyurethane systems for substrate composite systems. Executive Committee member of the polycarbonate business leader Shi Lewen (Dr. Markus Steilemann), said: "We are seeing polycarbonate thermoplastic composite materials market is experiencing significant growth in demand and through. enter the relevant composite materials development and production, we hope to become one of the driving force of the industry. We expect the composite in IT, automotive, transportation and consumer products will have broad prospects for development, which will further strengthen our market status. "

For a long time, Bayer MaterialScience has been provided based on a blend of polycarbonate and related products and application solutions for many industries. This material is extremely lightweight, durable, easy molding, easy processing, and can be reused many times. Currently, polycarbonate composites development work at Bayer MaterialScience has been going for some time.

Bayer MaterialScience believes polycarbonate composite material is very suitable for the production of the IT industry with high-quality housing. These composites can achieve the size of a higher quality and smaller, and have a variety of additional advantages. Hardware touch polycarbonate composite materials like metal, but the texture is light. This material also has excellent formability properties as well as texture and feel, and that this material also has the advantage of processing costs. For example, in the automotive industry, this composite material helps make the electric vehicle lighter, more energy efficient; compared with the aluminum material solutions, the polycarbonate composite material can more greatly reduce vehicle weight.

Thermoplastic Plastic Composites Co., Ltd. was established in 2007, currently has 12 employees. In addition to high-performance thermoplastic matrix fiber composites, the company also produces ultra-light foam plastic, to provide engineering and technical services.

Monday, March 9, 2015

Samsung again had bought a display panel company

Samsung's growing appetite for mergers and acquisitions, Samsung Electronics said it has acquired a US manufacturer of LED screens small businesses.

Samsung acquisition is located in Utah YESCO Electronics Corporation, the company specializes in the manufacture of digital signage and information badges, did not disclose the specific price.

Samsung's own production of some key components for electronic products, and its use on flat screen TVs and smartphones are from its display panel manufacturing sectors. Samsung LCD displays are produced mostly LED screen.

"Samsung will cooperate with YESCO Electronics production for a variety of extreme conditions, rugged display," Samsung said in a statement.

This acquisition is the Samsung in recent months seemingly unrelated M & A transactions together.

February, an unknown price Samsung acquired US mobile payment start-up companies LoopPay to enhance its flagship phone Galaxy S6 of software experience.

A week ago, Samsung, Samsung SDI said battery manufacturing subsidiary of Magna International in Austria will acquire battery pack manufacturing sector, in order to expand its influence in the electric vehicle battery market. Samsung said Magna car battery department, the production base and the signing of the contract with Magna All 264 employees will be integrated into Samsung's arm.

Samsung has also recently acquired Brazil's largest printing companies Simpress, thereby expanding its market in Latin America.

At the end of December, Samsung has $ 56 billion in cash reserves. In recent years, this has always been a conservative South Korean company acquired several mobile phones can enhance their core business and market position in consumer electronics technology companies.

Friday, March 6, 2015

2015MWC: 5G open road, the goal is sea stars

MWC 2015 Mobile World Congress came to an end today. As the ICT industry's most influential event, March 2 to 5, full of people, flooded. Exhibitors publish showcase the latest technology and their own work, lively discuss the potential of cooperation between business partners, who are eager to look to the future leader in technology, media and enthusiastic audience participation circulation in each booth: some good lively scene.

Have to say, MWC's organizers GSMA build a win-win platform and stage. In this year's stage, in the end who is the most shining? Is amazing Quartet Huawei Watch? Or chip makers of all kinds of black technology? Or Samsung for self-salvation S6?

I believe that, whether it is the watch, the flagship phone or dolphin show all kinds of technology are bright stars. And when we retrospective before each conference, as well as three days of the show, I think that we can make it on the "Galaxy" is the hot 5G era. Most so I wonder and excitement is big time 5G journey has been opened!

5G is not a castle in the air to promote the application of innovative demand 5G

When the MWC show various hot 5G, when the same with the author if you doubt that the popularity it has not 4G? 4G not spend it, 4G has only just begun, 5G is what? 5G is not fooled?

In fact, first of all say that the concept of the 5G. 5G is both 2G, 3G, 4G, after the next-generation communications technologies collectively. Although the principle is still in the drafting stage, there is no uniform standard, but there are several core providers will be several major initiatives mentioned:

First, 5G will be 10-100 times the speed of 4G, 4G speeds are also based on the basis of megabytes of bandwidth, 5G speeds up to 1Gbps-10Gbps speeds this level;

Second, 5G 4G have lower than the network delay, the delay from 50ms into 1ms.

Third, 5G able to serve more devices, in order to achieve real things. 5G single fan cover expected load growth in the number of connections from a few thousand to one million.

Fourth, 5G will introduce more intelligent factors, including more intelligent network management, advanced software-defined networks and other intelligent technologies.

After talking about the concept, now, why not 5G castles in the air? This is because, 5G currently have surly as driven applications. Imagine that, a lot of current technological bottleneck, in fact, stuck in the speed. Here one by one example:

Automatic driving, for example, to achieve a more secure, more intelligent autopilot, the need for more powerful big data processing capabilities. The ability to build more powerful, which means increasing the cost of vehicles and other kinds of contradictions and volume enhancement reasons.

In fact, the autopilot many problems are common and can learn and summarize intelligent optimization, building on the history of humanity's most powerful computer is actually a data center. Autopilot needs to support future data center, and to support the data center, you will need to meet all kinds of environmental data automobile, real-time high-speed data transmission to the processing center. At the same time, low-latency network to ensure the car's safety. So, which gave birth to one of the typical needs of the 5G.

Intelligent robots, industrial applications, for example, include household robots, unmanned aerial vehicles such smart devices, in fact, with autonomous vehicles have the same conflicts, but also can only further the birth of this type of application through 5G.

Finally, various types of virtual reality applications, for example, when we need a real-time transmission of data from the sensor when the more powerful, such as real-time to another place real scene, the transmission in your eyes, none other than non-5G.

Forward application of various types of technology evolution, 5G technology needs; and three properties 5G technology, in turn spawned a large number of applications have to imagine the future of space.

5G wins the 2020 landing of various commercial

Faced with the real needs of industry and consumers, driven by a keen technology industry already in the layout. From communications equipment manufacturers, the chip maker, to handset manufacturers, or are beginning to make their own 5G strategic layout.

Ericsson Pakistan in this exhibition once again demonstrated its latest achievements 5G test bed in July last year after the test bed to achieve the highest rate of 5 Gbps of Guards, Ericsson demonstrated two technical milestones: 5G-LTE dual-link (5G -LTE Dual Connectivity) and 5G multi-point connection (5G Multipoint Connectivity), the former allows the mobile device can connect 4G and 5G, while the latter allows the device to connect two 5G base, these technologies are expected to be commercially available in 2020.

Huawei is further demonstrated its wolf culture, Huawei rotating CEO HuHouKun Pakistan exhibition during direct "shouted", the leader of Huawei do 5G era slogan. He further explained that, 5G network is not a simple upgrade, but all rebuilt. Large bandwidth, ultra-low latency, massive number of connections, high speed mobile, full-spectrum access, etc., are required to buy the 5G technology to a new level. According to him, Huawei has invested in 5G 5,6 years, has been deeply involved in the development of standards and research 5G.

ZTE is in the MWC scene, showing the technique called Pre-5G, that leverage existing platforms and technologies 4G, 5G achieve some of the functions in order to achieve the arrow refers to 2020 commercial goals. MWC scene from view, Pre 5G 4G base stations still use the device, you can achieve a peak rate of 400M, equivalent to a 4 4G base stations, network deployment efficiency dramatically. The site uses a 4G handset, but in the network speed can reach 30 + Mbps / s, four times the normal speed 4G network.

In the chip level, the general manager Xie Qingjiang MediaTek is also clear that, MediaTek has invested manpower and resources to carry out R & D 5G area.

And when we sort out various strategies, we will find that each have surprisingly identical to around 2020 as a target point 5G commercial. In other words, 5G only not castles in the air, but also push forward the process.

Wireless Internet will eventually catch up with everything wired connection remodeling

Remember? Once upon a time, we marvel at 1Gbps network speed Google Fiber plan. We were in the Imagination, so fast network in addition to video applications, but also doing? However, from the perspective of the current experiment 5G wireless transmission can easily exceed the limited speed fiber network.

Subject to spectrum resources, spectrum fragmentation, environmental factors and high cost problems, why progress in wireless networks is still much faster than a wired network without him the reason, the truth is only one:? Demand, demand, or demand. As described in the first part, autopilot, artificial intelligence, industrial applications, and many other scenarios

When the speed is no longer an issue, what does all this mean? Imagine, when speed is not a problem when computing devices also need a separate CPU it? Also need a separate storage devices? And These similar Imagination, has only just begun.

And when we think about the issue itself, when the speed of rapid development, the connection itself meaning of the word is subversive and remodeling, remodeling the advent of the era of the connection. Our time, just as the power grid, telephone and telegraph network was invented, like the popularity of the times, this will be calculated by the device, as well as everything can be connected together in a network, an enormous change.

And this change in the end is what I here venture to predict?:

The first level, all the smart devices can be connected together to form a large network of artificial intelligence, an enormous, constantly self-evolution and learning super artificial intelligence;

The second level, by the rapid transmission of the network, this super artificial intelligence, can reach any point of the Earth at any time, to solve the problem or help humans. Like Uncharted Waters in series like human, with 5G networks, human society will once again produce a new series. From industrial, to medical care, even to the social management, can be performed remotely, even by artificial intelligence to carry out.

Wednesday, March 4, 2015

Qualcomm later fined US companies in China next five years will be very difficult

Although Qualcomm recognized fine six billion yuan, but the matter does not end here. China's economic growth slowed, the lack of regulatory transparency, and more powerful local competitors, affected by the impact of unfavorable factors superimposed, the day the United States in China, the company expects the next five years will be increasingly uncomfortable.

A Shanghai American Chamber of Commerce, said the annual report released March 4, 43% of those surveyed said that the prospects for the next five years, "optimistic", the figure dropped by 10 percentage points compared with 53% last year; while holding "slightly optimistic" attitude ratio of the number of respondents was 42%, compared with last year increased by 9 percentage points.

The survey was conducted last year by the end of October to early December in the Internet. Visit objects include Shanghai AmCham member companies (in China engaged in the business of American companies), in charge of small and medium enterprises and private entrepreneurs, a total of 377 companies participated in the survey.

US companies in China next five days will be increasingly difficult to US companies in China next five days will be more difficult

By 2014, China's GDP growth rate of 7.4 percent, the lowest since 24 years. Widely seen as the Chinese government will target economic growth in 2015 from 7.5% significantly reduced to 7%, the lowest in 11 years the goal.

Chinese regulators antitrust investigation against foreign companies since last year continues today. February 9, US chip giant Qualcomm was fined 6.088 billion yuan of the NDRC. It is also the biggest antitrust penalties.

More than half of respondents believe their companies become targets of government antitrust actions chance to rise. In recent years, the Chinese government's antitrust investigation of milk swept many industries, electronics and automobiles.

Nearly a third of respondents said that similar antitrust investigation brought great risks for their business, in 2014 this proportion was 13%. Survey shows that the highest medical, technology, communications, and the degree of concern auto companies.

US companies in China next five days will be increasingly difficult to US companies in China next five days will be more difficult

In addition, commercial website Business Insider noted that the report did not mention the impact of China's first anti-terrorism forthcoming bill to bring these companies. Reuters reported that the bill would require technology companies will provide the encryption key, and installation information security "back door" in the product.

The US government has come forward for their business requirements relaxed business environment. Just one day before the release of the report, US President Barack Obama accepted the Reuters interview, he told China's upcoming anti-terrorism bill questioned, and urged China China: If you want to do business with US companies, it is necessary to change this policy .

Tuesday, March 3, 2015

AMOLED screen brightness measurements is still a lack of standards

With smart phones increasingly high pixel screen, the screen resolution has been unable to identify the product as a consumer good or bad based on, and is expected to replace the screen brightness will become the reference when consumers buy. However, the current AMOLED screen brightness measurements still not certain standard, also cause difficulties on the appraisal.

According to technology website ExtremeTech reports, Samsung Electronics (Samsung Electronics) of the Galaxy S5 will be with excellent screen brightness based play content; LG Electronics (LG Electronics) launched the G3 brightness due to too low to get Comments favor.

Brightness measurement is better resolution measurements easy. LCD screen brightness measurements on relatively no doubt, mainly because of the penetration of LED backlight LCD screen rely on liquid crystal array presents a variety of colors. The LED light source itself will have a maximum brightness, and the user can see the amount of light is determined by the size and the number of pixels of.

Often used in high-end smart phones AMOLED screen, the brightness measurement standard is still no agreement. Also Nexus 6 screens, magazines measured by Anandtech maximum screen brightness of 258 nits (nit), and the results compared with others measuring 400 nits.

Each sub-pixel AMOLED screen (subpixel) can produce photons (photon), through voltage showing red, blue, green and other colors. If AMOLED pixel closed, it will appear black, this way also reduces the power consumption of the screen.

The LCD screen is different, a AMOLED pixel and no so-called maximum brightness. There are an average AMOLED screen brightness (Average Pixel Level; APL) is called the value, as a percentage of the number of pixels rendered luminous. Black screen APL is 0%, 100% all white, red, green and blue color was 33%. When less luminous pixels, which is a low APL, each pixel will be assigned to a higher power, high brightness light-emitting region representative.

When the APL is 30%, Nexus 6 screen can output more than 400 nits of brightness, but when the APL is 100% all white screen, the light output will be reduced to about 250 nits. It can be seen, Anandtech magazine test using APL is 100% all white screen, resulting in the measurement results are significant differences with others.

ExtremeTech reports that, in actual use, the majority of the screen has a very high APL, especially the Android 5.0 user interface will use a lot of white elements, APL its setting screen can be as high as 84%. It seems that the maximum brightness at very low APL achieved is not entirely reliable, so the actual maximum Nexus 6 screen brightness should be between 258 and 400 nits between nits.

Monday, March 2, 2015

MediaTek announced volume production multimode wireless charging chip solution MT3188

MediaTek today announced the industry's first multi-mode wireless charging technology chip MT3188 has been officially available to customers. Including power electronics, monitoring circuit and a resonator including reference design has been through a wireless charging standard Alliance for Wireless Power (A4WP), Wireless Power Consortium (WPC) and the Power Matters Alliance (PMA) certification. With this wireless charging chip volume production, MediaTek to provide the world's first multi-mode wireless charging technology for billions of consumers worldwide semiconductor companies.

MT3188 compatible A4WP resonance wireless charging standard and WPC and PMA certified inductive wireless charging standard, and cost less than single-mode resonant solutions. Because multi-mode wireless charging function, MT3188 allows manufacturers of smart phones and other devices can be directly applied to any mainstream charger currently on the market for their products. MT3188 wireless charging solutions for users with unprecedented experience, including devices can be arbitrarily placed on the charger, while charging for multiple devices, the use of RezenceTM A4WP technologies such as long-distance charge.

General Manager of MediaTek wireless connectivity business unit Caishou Ren said: "MediaTek to get the world's three major wireless charging standard certification, and the first mass production of multi-mode wireless charging chip, can alleviate problems because manufacturers and consumers caused by multiple criteria, This once again proves the strength of MediaTek leading industrial technology .MT3188 intelligent use of magnetic resonance receiver architecture simplifies product design, but also allow users to be more simple and convenient wireless charging devices for different platforms. "

Kupiin famous brand in digital technology, general manager of Shenzhen Brocade Aurora Jijing Yao said: "The global standard will help the market grow, wireless charging is the key to whether the rapid take-off MediaTek understand the technical bottleneck, thereby providing cross these. barriers to product solutions to solve customer problems also contributed to the growth of future market opportunities. "

MT3188 has been A4WP BSS 1.2, Qi 1.1.2 and PMA 1.0 certification. MT3188 now in volume production, will be used with multi-mode wireless charging products, including smart phones, tablet computers and wearable devices.

Sunday, March 1, 2015

Microchip new sports movement monitoring module makes it easy

The world's leading provider of microcontroller, announced the MM7150 motion module mixed-signal, analog and Flash-IP solutions provider --Microchip Technology Inc. (Microchip Technology, Inc.) Embedded World held in Germany (Embedded World) Conference This module integrates Microchip SSC7150 coprocessors and 9-axis motion sensors, including accelerometers, magnetometers and gyroscopes, compact and easy-to-use package. Just with most MCU / MPU simple I2C ™ connection, various embedded / Things (IoT) applications can easily take advantage of advanced motion and position data acquisition module.




The motion module contains a pre-programmed complex sensor fusion algorithm Microchip SSC7150 motion coprocessor, such algorithms to intelligently filter, compensation and integration of raw sensor data to provide highly accurate position and orientation information. This small movement sensor module can be used to pre-populate (Bosch BMC150 (six-axis digital compass) and BMG160 (three-axis gyroscope)) the data provided in the course of running for self-calibration. Because MM7150 motion module uses single-sided design, so in the manufacturing process can be easily welded. In addition, Microchip also offers MM7150 PICtail ™ Plus Daughter Board, to help designers to easily develop a variety of products for motion applications. MM7150 motion module wide range of applications for embedded (such as portable devices and robotics), industrial (such as commercial trucks, industrial automation, patient tracking and smart breeding) and consumer electronics markets (such as the Internet of Things (IoT), remote control, game equipment, toys and wearable devices) and other areas.

Patrick Johnson, vice president of products at Microchip computing, said: "With this new campaign module, designers can low-cost, easily for a variety of embedded networking applications and add motor function due to the motion module MM7150 key algorithms are pre-programmed. so almost anyone can easily add this functionality without having to spend years to become an expert in the field of sport. "

Development Support

MM7150 is supported by the MM7150 PICtail ™ Plus Daughter Board (AC243007), the daughter board can be plugged directly into Microchip Explorer 16 Development Board (part #: DM240001) use by Microchip PIC® microcontrollers are widely used in order to achieve quick and easy prototyping.